Technical Summary
| Product type designation | IM 153-2 |
|---|---|
| Firmware version | V6.0.0 |
| Rated value (DC) | 24 V |
| Permissible range, lower limit (DC) | 20.4 V |
| Permissible range, upper limit (DC) | 28.8 V |
| Number of modules per DP device interface, max. | 12 |
| Transmission procedure | RS 485 |
| Transmission rate, max. | 12 Mbit/s |
| Design of the connection | 9-pin sub D socket |
| Bus protocol/transmission protocol | PROFIBUS DP to EN 50170 |
| IP degree of protection | IP20 |
| Isolation voltage | 500 V |
Applications
Used for connecting an ET 200M IM 153-2 High Feature setup with up to 12 S7-300 modules.
Used for direct data exchange as publisher with all IO and as subscriber with F-IO only.
Used for timestamping in isochronous-mode operation.
Key Features
SIPLUS ET 200M IM153-2 (*BA02) T1 rail based on 6ES7153-2BA10-0XB0 with conformal coating.
For max. 12 S7-300 modules with redundancy capability.
Timestamping suitable for isochronous-mode operation.
Rated value (DC): 24 V; permissible range: 20.4 V to 28.8 V.
RS 485 transmission procedure with 12 Mbit/s max. and 9-pin sub D socket.
IP20 protection and isolation voltage 500 V.
Frequently Asked Questions
What is Siemens 6AG1153-2BA10-2XY0?
It is a SIPLUS ET 200M IM 153-2 spare part.
What is the maximum module capacity for this IM 153-2?
It supports up to 12 S7-300 modules.
Which interface and connection does this module use?
It uses RS 485 with a 9-pin sub D socket.
What are the power supply limits for 6AG1153-2BA10-2XY0?
Rated value (DC) is 24 V, with a permissible range of 20.4 V to 28.8 V.
